Tilton

15 products
15 products
Sort

About Tilton

Tilton Engineering, based in Buellton, California, makes racing pedal assemblies, master cylinders, balance bars and remote bias adjusters, as well as clutches and starter motors. At VMEP we supply the 600 Series pedal boxes and the brake controls that go with them.

The 600 Series is Tilton's fixed-mount master cylinder and balance bar range: forged aluminium pedals, foot pads that adjust for height and width, a 7/16" balance bar and oil-impregnated bronze bushings at the pivots. Master cylinders are not included, and each listing lets you add them. Tilton states the 600 Series is not designed for use with ABS.

600 Series pedal boxes we list

PartLayoutPedalsPedal ratioWeight
72-604Floor mountClutch, brake5.29, 5.44, 5.61 or 5.75:12.1 kg
72-603Floor mountClutch, brake, throttle5.29, 5.44, 5.61 or 5.75:12.5 kg
72-607Firewall mountClutch, brake5.0 to 6.2:12.2 kg
72-608OverhungClutch, brake5.0 to 6.2:12.2 kg
72-617UnderfootClutch, brake5.4 to 6.9:12.1 kg
72-618UnderfootBrake, throttle5.4 to 6.9:1Not listed
72-616UnderfootClutch, brake, throttle5.4 to 6.9:12.9 kg

Weights are Tilton's, without master cylinders.

Master cylinders, bias adjusters and reservoirs

  • 76 Series master cylinders: six bores from 5/8" to 1", with a top and a rear AN-3 outlet and a 7/16"-20 inlet, also sold with a direct-mount reservoir. They fit the 2.25" two-bolt pattern, and the underfoot pedal boxes take 76 Series only.
  • Bias adjusters: the remote cable adjuster in yellow or red, a billet aluminium version, and a 90 degree adjuster for 3/8" or 7/16" balance bars when the cable would foul the clutch or throttle.
  • Reservoirs: Tilton's three-chamber reservoir, standard or low profile, with separate chambers for the front brakes, rear brakes and clutch, plus a single-chamber reservoir.
  • Throttle pedal 72-615: a matching throttle for the 72-607 and 72-608 pedal boxes.

For help choosing a pedal box or bore sizes, or a Tilton part that isn't listed, call 01789 453 967 or email alex@vmep-ltd.co.uk.

01 Which Tilton pedal box do I need?

Start with where it mounts. Floor mount boxes bolt to the floor with the master cylinders facing forward; firewall mount boxes bolt to the bulkhead; overhung boxes hang under the dash with the cylinders in the cockpit, away from engine heat. Underfoot boxes put the cylinders under your feet, facing back, so the pedals sit further forward. For a dual-clutch gearbox, the 72-618 is brake and throttle only.

02 Do Tilton pedal boxes come with master cylinders?

No. Tilton supplies the pedal box without master cylinders, so each of our listings has an option to add them, and we'll ask which bores you want. The underfoot boxes (72-616, 72-617 and 72-618) only take Tilton's 76 Series cylinders. The floor, firewall and overhung boxes accept industry-standard flange-mount cylinders, including Tilton's 73 to 76 Series.

03 How much does a Tilton pedal box cost?

At VMEP a Tilton 600 Series pedal box starts at £340 ex VAT for the 72-604 two-pedal floor mount without cylinders, and runs to £1,195 for the 72-616 underfoot box with three 76 Series cylinders and throttle linkage. 76 Series master cylinders are £120 each, or £165 with a direct-mount reservoir. UK orders add 20% VAT.

04 Which master cylinder bore size should I use?

A smaller bore makes more line pressure for the same pedal effort but needs more pedal travel; a larger bore gives a shorter, firmer pedal that needs more effort. The 76 Series comes in six bores from 5/8" to 1", and Tilton's adjustable pedal ratios let you tune feel without changing bores. If you're unsure, send us the car, the calipers and your current set-up before you order.

05 How does a brake bias adjuster work?

The balance bar links the brake pedal to two master cylinders, one for the front brakes and one for the rear. Turning the bar shifts it relative to the pedal; Tilton's instructions say that shifting it towards the rear master cylinder increases rear braking. The remote cable adjuster lets the driver do this from the cockpit. Tilton says never adjust it while the brakes are applied.

06 Can I use Tilton 600 Series pedals with ABS?

Tilton says no: the 600 Series is not designed for use with ABS, and the 76 Series cylinders may not suit some ABS systems because the pressure pulses they send back can damage the high-pressure seal. For ABS, Tilton points to its 800, 850 and 900 Series pedal boxes with 79 Series master cylinders, which aren't on our site, so ask us.

07 Where should the brake fluid reservoirs go?

Above the calipers. Tilton's systems are gravity fed, and its instructions say mounting the reservoirs above caliper level keeps the pedal firm and is more reliable than a residual pressure valve. The three-chamber reservoir keeps front brakes, rear brakes and clutch separate; the low-profile version holds 182 ml, 117 ml and 59 ml, with AN-4 fittings.

Also distributed by VMEP