ARE

35 products
35 products
Sort

About ARE

ARE Dry Sump Systems is Armstrong Race Engineering, Gary Armstrong's company in Loomis, California. ARE designs and makes cast aluminium dry sump pans, gear and Roots type dry sump pumps, oil tanks and vent cans, and the Spintric air/oil separator, which ARE designed and patented. At VMEP we can supply the full ARE range, not only the parts listed above.

Most engine kits come three ways: the sump on its own, the sump with a pump, or a full kit that adds the pump drive, the oil tank and a remote filter. ARE's pans are cast aluminium, CNC machined, with a windage tray inside to help the scavenge pickups clear the oil.

Engines we list ARE sumps for

EngineWhat we list
BMW M10 and M50Sump, sump with pump, full kit
Chevrolet LS1 to LS6, F body and Y body2 or 4 stage; sump, sump with pump, full kit
Ford ZetecSump, sump with pump, full kit
Ford Duratec V6 (Noble)Sump, sump with pump, full kit
Ford Duratec 2.0 EcoBoostSump
Ford 2000Sump
Formula Ford 1600Sump
Formula Ford 1600, Van Diemen mountsSump
Honda K20Sump, sump with pump, full kit
Honda S2000Sump, sump with pump, full kit
Honda VTECSump, sump with pump, full kit
Mitsubishi Evo 8 and 9Sump, sump with pump, full kit
Mitsubishi Evo 10Sump
Alfa Romeo 1750 to 2000Sump, sump with pump, full kit

Pumps, tanks and the Spintric

  • Pumps: single stage scavenge pumps in gear or Roots type, two stage scavenge only pumps (including an Ecotec side mount), 3 stage pumps with a pressure regulator, 3 stage and 4 stage side mount pumps, and mounting plates for the S2000, Nissan, Subaru and Formula Ford, plus a universal plate.
  • Oil tanks: cast/CNC and fabricated tanks in 1.5, 2 and 2.5 gallons, tank brackets, 0.6 and 1 litre vent cans, 110 V and 240 V tank pre-heaters and a remote oil filter bracket. ARE's cast tanks are A356 aluminium, heat treated to T6 and CNC machined, and come apart in two parts for cleaning.
  • Spintric: the in-line air/oil separator, fitted between the scavenge outlet and the tank, with -10, -12 or -16 fittings.

Every part a system needs, with prices and two worked builds, is in our dry sump parts checklist. For help putting a system together, or an ARE part that isn't listed, call 01789 453 967 or email alex@vmep-ltd.co.uk.

01 What comes in an ARE full dry sump kit?

Everything to convert the engine: the ARE sump and its screen fittings, a dry sump pump and its drive, an oil tank with brackets, and a remote oil filter. Some kits add a vent can or a dipstick, and the pump varies: a 3 stage on the Honda kits, a 4 stage on the Evo 8 and 9. Each product page lists its exact kit.

02 How much does an ARE dry sump cost?

At VMEP an ARE sump on its own starts at £725 ex VAT. A sump with pump runs from £1,960 to £2,675, and a full kit from £3,890 to £5,255, depending on the engine. Pumps start at £860, oil tanks at £845, and the Spintric is £1,025. UK orders add 20% VAT.

03 How many scavenge stages do I need?

We go by ARE's own guidance: two scavenge stages are enough for a normally aspirated engine making moderate power, and three are normally recommended for high-power, high-rpm, turbocharged or supercharged engines. A pump's stage count includes the pressure stage, so a 3 stage pump has one pressure stage and two scavenge stages, unless it is sold as scavenge only.

04 What does a Spintric do?

The Spintric is ARE's in-line air/oil separator. It fits in the scavenge line between the pump and the tank and spins the air out of the returning oil through machined internal channels, with no moving parts. ARE is clear that it is not a breather or a vent can. We supply it with -10, -12 or -16 fittings to match your scavenge line.

05 What size dry sump tank should I use?

ARE's advice is to fit the tallest, largest tank the car will take, because the tank holds all the engine's oil, and a tank's quoted size includes the air gap at the top. Match the tank fittings to the pump, usually -12 or -16, and check your championship's rules, as some don't allow the tank in the cockpit. We list ARE tanks in 1.5, 2 and 2.5 gallons.

06 How fast should a dry sump pump run?

ARE's general rule is 50 to 60 percent of crank speed, set against the engine's maximum rpm, because dry sump pumps start to lose efficiency and can cavitate above roughly 4,500 to 5,200 pump rpm. The ratio comes from the pulley sizes and belt length, so if you are mounting the pump yourself, measure the centre-to-centre distance from pump shaft to crank before you order.

07 Can you get ARE parts that aren't listed here?

Yes. ARE also makes pans for Mazda, Nissan, Porsche, Subaru, Toyota, Volkswagen and Suzuki Hayabusa engines, among others, plus ATI dampers, filter adapters, screen fittings, pulleys and belts. We can supply the full ARE range: send us the engine, the car and what you already have, and we'll come back with a quote.

Also distributed by VMEP