CHASSIS SET UP EQUIPMENT
A small variation in height at each scale pad can significantly effect the scale reading,
VMEP stock sizes of set up floors are adjustable in track width, wheelbase and height which allows for each scale to be positioned centrally to the wheel and level to one another over their stated ranges, providing accurate, repeatable readings.
​
Each floor is supplied fully built up in sections and consists of the following:
-
2 X aluminium ladder frame pad levellers
-
2 X access ramps
-
2 X wheelbase connection ramps (2 piece, one slide adjuster)
-
2 X track width connection ramps (2 piece, one slide adjuster)
-
2 X roll of ramps with wheel stop
​
Each section of the floor slots together and features inbuilt laser levelling for fast set up and use.
​
High quality studs screw into threaded bosses, adjustable from the top with non slip feet providing a range of height adjustment.
​
The standard aluminium ladder frame pad levellers are designed to suit 15X15X2.5" scales, but can also be made to suit 10x10" or 12x12" scales.
​
VMEP bump steer gauges can be attached to the floor with the use of a stand which is available separately or part of the stage kits available. This provides a rigid mount for the gauge and ensures the dials are perpendicular to the floor surface, whilst our turn plates are also designed to be used with the floor.
​
The purpose built flight case kit provides safe and secure transportation of the floor.
​
Three stock sizes are detailed below, whilst bespoke floors can also be made to order.
The advantage of a bespoke floor is that it can be fixed to your vehicle dimensions, which will save time with the initial setting up of the floor.
​
​
​
​
VMEP Set Up Floors® - Pro Range
Three stock sizes of set up floor are available to suit different track width and wheelbases. The sizes and adjustment ranges are listed below:
​
Stock size 1:
​
-
Track width - 1200-1500mms
-
Wheelbase - 2000-2300mms
Stock size 2:
​
-
Track width - 1200-1500mms
-
Wheelbase - 2300-2600mms
Stock size 3:
​
-
Track width - 1500-1800mms
-
Wheelbase - 2600-2900mms
​
Chassis set up will play a major role in any race or championship success, and VMEP set up floors can help toward producing reliable, repeatable set up results which will ultimately increase race success.
Each floor offers the following:
​
-
Fast assembly / disassembly
-
Self alignment due to unique bobbin slot design
-
Infinite adjustability between stated ranges
-
Easily transportable between workshop and circuit
-
Reliable, repeatable results
Please get in touch to discuss your requirements.
VMEP Set Up Floor® Kits
There are a variety of options available depending upon your requirements.
Stage 1 = complete set up floor, stock size or bespoke
​
Stage 2 = complete set up floor, turn plates including case, bump steer gauge and mounting stand
​
Stage 3 = complete set up floor with twin flight case kit
​
Stage 4 = complete set up floor, turn plates including case, bump steer gauge, mounting stand and twin flight case kit
​
The options are available to view in the chassis shop.
​